Screwdriver

Results: 353



#Item
1TASK: Restring or Replace Cord Lock for Cellular, Pleated or Roman Shades Use If/When: U-shaped or straight wear bar cord lock on aluminum headrail needs to be restrung or replaced. Tools Needed: Flathead screwdriver, Ne

TASK: Restring or Replace Cord Lock for Cellular, Pleated or Roman Shades Use If/When: U-shaped or straight wear bar cord lock on aluminum headrail needs to be restrung or replaced. Tools Needed: Flathead screwdriver, Ne

Add to Reading List

Source URL: shared.springswindowfashions.com

Language: English - Date: 2014-04-24 15:15:44
    2TASK: Correct Uneven Intermediate Rail of Cordless Bottom Up Top Down Shades Use If/When: Intermediate rail is not even when shade is raised. Tools Needed: Flathead Screwdriver Example of intermediate rail hanging uneven

    TASK: Correct Uneven Intermediate Rail of Cordless Bottom Up Top Down Shades Use If/When: Intermediate rail is not even when shade is raised. Tools Needed: Flathead Screwdriver Example of intermediate rail hanging uneven

    Add to Reading List

    Source URL: shared.springswindowfashions.com

    Language: English - Date: 2014-04-24 15:15:44
      3TASK: Correct Uneven Cordless Cellular and Pleated Shades Use If/When: Cordless shade hangs or operates unevenly. Tools Needed: Carpenter’s Level, Flathead Screwdriver, Tape 1. Use a carpenter’s level to make sure th

      TASK: Correct Uneven Cordless Cellular and Pleated Shades Use If/When: Cordless shade hangs or operates unevenly. Tools Needed: Carpenter’s Level, Flathead Screwdriver, Tape 1. Use a carpenter’s level to make sure th

      Add to Reading List

      Source URL: shared.springswindowfashions.com

      Language: English - Date: 2014-04-24 15:15:32
        4TASK: Adjust height on Indoor or Outdoor Shades with Continuous Loop and a Cassette Valance Use If/When: The shade has a Cassette Valance and will not raise or lower completely. Tools Needed: Screwdriver Reasons the sha

        TASK: Adjust height on Indoor or Outdoor Shades with Continuous Loop and a Cassette Valance Use If/When: The shade has a Cassette Valance and will not raise or lower completely. Tools Needed: Screwdriver Reasons the sha

        Add to Reading List

        Source URL: shared.springswindowfashions.com

        Language: English - Date: 2014-04-24 15:15:30
          5Productivity & Safety Solutions 1 Tool For 3 Jobs Screwdriver Hand Hole Lid Lifter

          Productivity & Safety Solutions 1 Tool For 3 Jobs Screwdriver Hand Hole Lid Lifter

          Add to Reading List

          Source URL: madillc.com

          - Date: 2017-06-27 22:15:30
            6TASK: Correct Operation of Cordless Cellular, Pleated or Roman Shades Use If/When: Cordless shade will not raise and lower. Tools Needed: Flathead Screwdriver 1. Raise shade fully. Remove shade from installation brackets

            TASK: Correct Operation of Cordless Cellular, Pleated or Roman Shades Use If/When: Cordless shade will not raise and lower. Tools Needed: Flathead Screwdriver 1. Raise shade fully. Remove shade from installation brackets

            Add to Reading List

            Source URL: shared.springswindowfashions.com

            Language: English - Date: 2014-04-24 15:15:44
              7TASK: Replacing Continuous Loop on shades manufactured afterUse If/When: Replacing the continuous loop on shades manufactured after. Tools Needed: Flathead Screwdriver 1. Raise shade fully. Remove screw to rel

              TASK: Replacing Continuous Loop on shades manufactured afterUse If/When: Replacing the continuous loop on shades manufactured after. Tools Needed: Flathead Screwdriver 1. Raise shade fully. Remove screw to rel

              Add to Reading List

              Source URL: shared.springswindowfashions.com

              Language: English - Date: 2014-04-24 15:15:32
                8GB2.0 Installation Tools Needed: #2 Flathead screwdriver, #2 Philips screwdriver, 5mm allen key, hammer, 10mm and 13mm wrench, pair of Vise-grips and a pair of pliers, and a 5/8 or comparable socket Remove the case (see

                GB2.0 Installation Tools Needed: #2 Flathead screwdriver, #2 Philips screwdriver, 5mm allen key, hammer, 10mm and 13mm wrench, pair of Vise-grips and a pair of pliers, and a 5/8 or comparable socket Remove the case (see

                Add to Reading List

                Source URL: baratza.com

                Language: English - Date: 2015-10-13 16:43:04
                  9SideKX PX3 Installation TOOLS REQUIRED: #1 Phillips Screwdriver, plastic coated pliers, or small spanner wrench, and a 10mm Socket or nut-driver DO NOT USE an ADJUSTABLE WRENCH or an OPEN END WRENCH, Loosen the 4 knurle

                  SideKX PX3 Installation TOOLS REQUIRED: #1 Phillips Screwdriver, plastic coated pliers, or small spanner wrench, and a 10mm Socket or nut-driver DO NOT USE an ADJUSTABLE WRENCH or an OPEN END WRENCH, Loosen the 4 knurle

                  Add to Reading List

                  Source URL: gemsproducts.com

                  - Date: 2017-01-07 00:00:09
                    10SideKX KX3 Installation TOOLS REQUIRED: #1 Phillips Screwdriver and a 10mm Socket or nut-driver, DO NOT USE an ADJUSTABLE WRENCH or an OPEN END WRENCH, it may scratch the surface Open the radio as though you are going to

                    SideKX KX3 Installation TOOLS REQUIRED: #1 Phillips Screwdriver and a 10mm Socket or nut-driver, DO NOT USE an ADJUSTABLE WRENCH or an OPEN END WRENCH, it may scratch the surface Open the radio as though you are going to

                    Add to Reading List

                    Source URL: gemsproducts.com

                    - Date: 2017-01-06 23:57:47